ปะเก็นไร้ใยหิน (Non-Asbestos)
ปะเก็นไร้ใยหิน TEMAC Temasil
https://www.siamexp.com/p17803
Features
ปะเก็นไร้ใยหิน TEMAC Temasil ทนความร้อนสูงสุด 400°C ทนแรงดัน 100 bar มีหลายขนาดและหนา ซีลกันรั่วอุตสาหกรรม (Non-Asbestos)
ทนอุณหภูมิสูงสุดได้ (ระยะสั้น) : 400 °C
ทนอุณหภูมิสูงสุดได้ (การใช้ต่อเนื่องระยะยาว) : 250 °C
ทนแรงดันสูงสุดได้ : 100 bar
ขนาด:
1.5 x 1.5 m
1.5 x 1.0 m
1.5 x 3.0 m
ความหนา : 0.5, 0.8, 1.0, 1.5, 2.0, 3.0. 4.0., 5.0, 6.0,8.0
สี : ฟ้า
ทนอุณหภูมิสูงสุดได้ (ระยะสั้น) : 400 °C
ทนอุณหภูมิสูงสุดได้ (การใช้ต่อเนื่องระยะยาว) : 250 °C
ทนแรงดันสูงสุดได้ : 100 bar
ขนาด:
1.5 x 1.5 m
1.5 x 1.0 m
1.5 x 3.0 m
ความหนา : 0.5, 0.8, 1.0, 1.5, 2.0, 3.0. 4.0., 5.0, 6.0,8.0
สี : ฟ้า
Specifications
| ปะเก็นไร้ใยหิน TEMAC Temasil : GENERAL INFORMATION | |
|---|---|
| PROPERTY | DESCRIPTION |
| Description | High quality gasket jointing containing mixture of temperature resisting mineral and aramid fibres with special nitrile rubber binder. Suitable for sealing hot and cold water, steam, oil, gases and general mediums. |
| Application | water,steam, gas, oil, alcohols, fuel, basic chemicals |
| Surface | All jointings are produced with an antistick surface on one side. |
| Wire insertion | Majority of the styles can be supplied with a wire insertion. |
| TECHNICAL SPECIFICATIONS | |
|---|---|
| PROPERTY | VALUE |
| Max. short-term temperature (Peak) | 400 °C |
| Max. lasting temperature (Continual) | 250 °C (steam 200 °C) |
| Max. pressure | 100 bar |
| Colour | Blue |
| Marking acc. to DIN 28 091-2 | FA-MA-1-0 (ST) |
| Marking acc. to ASTM F 104 | F712 111 M5 (6) |
| Possibility of wire mash | Yes |
| Certification | DNV, TZW, GOST P |
| Density DIN 28090-2 | 1.7 - 2.0 g/cm³ |
| Compressibility ASTM F 36J | 5-15% |
| Recovery min. ASTM F 36J | 50% |
| Residual stress (16h/175°C) DIN 52 913 | ≈27 MPa |
| Gas leakage λ2,0 DIN 3535-6 | ≈ 0.04 mg/(s.m) |
| Oil IRM 903 (5h/150°C) ASTM F 146 | 4% |
| ASTM Fuel B (5h/23°C) ASTM F 146 | 5% |
Specification
High quality gasket jointing containing mixture of temperature resisting mineral and aramid fibres with special nitrile rubber binder. Suitable for sealing hot and cold water, steam, oil, gases and general mediums.
Application & Features
- Application: water, steam, gas, oil, alcohols, fuel, basic chemicals
- Surface: All jointings are produced with an antistick surface on one side.
- Wire insertion: Majority of the styles can be supplied with a wire insertion.
- Possibility of wire mash: Yes
- Colour: Blue
- Operating Limits
- Max. pressure: 100 bar
- Max. lasting temperature (Continual): 250 °C (steam 200 °C)
- Max. short-term temperature (Peak): 400 °C
Technical Characteristics
- Density DIN 28090-2: 1.7 - 2.0 g/cm³
- Compressibility ASTM F 36J: 5-15%
- Recovery min. ASTM F 36J: 50%
- Residual stress (16h/175°C) DIN 52 913: ≈27 MPa
- Gas leakage λ2,0 DIN 3535-6: ≈ 0.04 mg/(s.m)
- Oil IRM 903 (5h/150°C) ASTM F 146: 4%
- ASTM Fuel B (5h/23°C) ASTM F 146: 5%
Standards & Certifications
- Certification: DNV, TZW, GOST P
- Marking acc. to ASTM F 104: F712 111 M5 (6)
- Marking acc. to DIN 28 091-2: FA-MA-1-0 (ST)